Comments for Yay, I fixed it... http://jrklein.com Technical Tips and Code Examples from Jason Klein Tue, 11 Oct 2011 15:39:53 +0000 hourly 1 http://wordpress.org/?v= Comment on Configuring Sipura SPA-3000 as trunk within Asterisk VoIP PBX Server by jrklein http://jrklein.com/2006/10/15/configuring-sipura-spa-3000-as-trunk-within-asterisk-voip-pbx-server/#comment-45 jrklein Tue, 11 Oct 2011 15:39:53 +0000 http://jrklein.com/?p=41#comment-45 It sounds like you want to connect the SPA-2102 to the phone jack on your VoIP provider's hardware? When a call comes in, you want the SPA-2102 to receive the call from the VoIP provider's hardware via a normal phone cable and forward the call to your Elastix PBX via SIP? I do know that this is possible! I don't have my SPA-3000 hardware any more, so I cannot tell you how to configure the SPA-2102. Sorry that I can't help more. Good luck!! It sounds like you want to connect the SPA-2102 to the phone jack on your VoIP provider’s hardware? When a call comes in, you want the SPA-2102 to receive the call from the VoIP provider’s hardware via a normal phone cable and forward the call to your Elastix PBX via SIP?

I do know that this is possible! I don’t have my SPA-3000 hardware any more, so I cannot tell you how to configure the SPA-2102. Sorry that I can’t help more. Good luck!!

]]> Comment on Configuring Sipura SPA-3000 as trunk within Asterisk VoIP PBX Server by jong uresan http://jrklein.com/2006/10/15/configuring-sipura-spa-3000-as-trunk-within-asterisk-voip-pbx-server/#comment-44 jong uresan Tue, 11 Oct 2011 07:16:41 +0000 http://jrklein.com/?p=41#comment-44 Hi, I like your post. It inspire to test this setup in the future but right now i have a question regarding different kind of setup. I have a VOIP number, linksys sipura 2102 and elastix pbx on my home. What I need is that if their is an incoming call, IVRS would mediate and the caller will dial the extension. How would i use my spa2102 (as trunk) like you did. Local VOIP provider don't allow voip server to voip server connection.. Your help is very much appreciated. Thank you. Hi,

I like your post. It inspire to test this setup in the future but right now i have a question regarding different kind of setup.

I have a VOIP number, linksys sipura 2102 and elastix pbx on my home. What I need is that if their is an incoming call, IVRS would mediate and the caller will dial the extension. How would i use my spa2102 (as trunk) like you did. Local VOIP provider don’t allow voip server to voip server connection..

Your help is very much appreciated.

Thank you.

]]> Comment on QuickBooks 2011 installation Error 1920 on Windows XP by jrklein http://jrklein.com/2011/05/13/quickbooks-2011-installation-error-1920-on-windows-xp/#comment-17 jrklein Tue, 21 Jun 2011 01:17:06 +0000 http://jrklein.com/?p=71#comment-17 I've never run into .Net CAS Policy errors with QB. I doubt the CAS error is related to the service hack. Have you tried to uninstall/reinstall .Net? Error (-6209, 0), Microsoft .NET CAS Policy Manager has encountered a problem and needs to close http://support.quickbooks.intuit.com/support/articles/SLN41275 I’ve never run into .Net CAS Policy errors with QB. I doubt the CAS error is related to the service hack. Have you tried to uninstall/reinstall .Net?

Error (-6209, 0), Microsoft .NET CAS Policy Manager has encountered a problem and needs to close
http://support.quickbooks.intuit.com/support/articles/SLN41275

]]> Comment on QuickBooks 2011 installation Error 1920 on Windows XP by Paul http://jrklein.com/2011/05/13/quickbooks-2011-installation-error-1920-on-windows-xp/#comment-16 Paul Tue, 21 Jun 2011 00:58:38 +0000 http://jrklein.com/?p=71#comment-16 Thanks for all these valuable information jrklein... I just have one question though, coz when I open QB after installation it encountered an error relating to .Net CAS Policy. It the rfc868time tool affecting .Net components too? Thanks in Advance! Thanks for all these valuable information jrklein… I just have one question though, coz when I open QB after installation it encountered an error relating to .Net CAS Policy. It the rfc868time tool affecting .Net components too?

Thanks in Advance!

]]> Comment on QuickBooks 2011 installation Error 1920 on Windows XP by jrklein http://jrklein.com/2011/05/13/quickbooks-2011-installation-error-1920-on-windows-xp/#comment-8 jrklein Sat, 18 Jun 2011 01:36:40 +0000 http://jrklein.com/?p=71#comment-8 I'm sure you could substitute this time service for any other service executable (.exe) file. Keep in mind that you most likely will NOT be able to run multiple instances of this time service on the same computer. I assume that a second instance would fail to start because the TCP or UDP port that it needs is already locked/opened by the first instance. You could find another simple service OR you could stop other services that are using this hack before you repeat the hack with other services. I’m sure you could substitute this time service for any other service executable (.exe) file. Keep in mind that you most likely will NOT be able to run multiple instances of this time service on the same computer. I assume that a second instance would fail to start because the TCP or UDP port that it needs is already locked/opened by the first instance. You could find another simple service OR you could stop other services that are using this hack before you repeat the hack with other services.

]]> Comment on QuickBooks 2011 installation Error 1920 on Windows XP by Paul http://jrklein.com/2011/05/13/quickbooks-2011-installation-error-1920-on-windows-xp/#comment-7 Paul Fri, 17 Jun 2011 22:01:22 +0000 http://jrklein.com/?p=71#comment-7 This is a great tool! It worked like even on Windows 7. By the way, do you think this will work with other service? On my case, I tried to install Quickbooks Database Server Manager on the host computer(Windows Server 2003), and the service Quickbooksdb21 won't start. The executable file is located on C:\Program Files\Intuit\Quickbooks Enterprise Solutions 11.0. Thanks in Advance! This is a great tool! It worked like even on Windows 7. By the way, do you think this will work with other service? On my case, I tried to install Quickbooks Database Server Manager on the host computer(Windows Server 2003), and the service Quickbooksdb21 won’t start. The executable file is located on C:\Program Files\Intuit\Quickbooks Enterprise Solutions 11.0. Thanks in Advance!

]]> Comment on QuickBooks 2011 installation Error 1920 on Windows XP by jrklein http://jrklein.com/2011/05/13/quickbooks-2011-installation-error-1920-on-windows-xp/#comment-6 jrklein Thu, 02 Jun 2011 02:14:29 +0000 http://jrklein.com/?p=71#comment-6 Glad to hear that this helped someone else! :) Glad to hear that this helped someone else! :)

]]> Comment on QuickBooks 2011 installation Error 1920 on Windows XP by GB http://jrklein.com/2011/05/13/quickbooks-2011-installation-error-1920-on-windows-xp/#comment-5 GB Thu, 02 Jun 2011 02:09:57 +0000 http://jrklein.com/?p=71#comment-5 THANK YOU! Great post. Saved my butt. Could not get a straight answer out of Intuit or anyone else. I don't use the IDP service and was completely stuck with the update. Thanks again for a great & simple solution! THANK YOU! Great post. Saved my butt. Could not get a straight answer out of Intuit or anyone else. I don’t use the IDP service and was completely stuck with the update. Thanks again for a great & simple solution!

]]>